A wide pocket version of the 850-500 Series curtain wall system for accommodating up to 27 mm I.G. units.
Types
- Four (4) sided captive glazed only
- 600 Pascal water penetration rated
Features
- Waterproofing characteristics based on pressure equalisation principles
- Internal glazed wet seal for improved weatherproofing required on high-rise applications
- Accommodates I.G. units up to 27 mm.
- Compatible with 475 and 478 series door systems and 875 series sub-framing
Hardware
- Extruded external neoprene glazing gaskets
Limitations
-
Finish floor to finish floor spans not to exceed 4 m (guide only dependent upon number of and position of transoms).
Note: Stack joint positioning relative to slab level will dramatically affect structural capabilities of the system. Optimum position between 15% and 20% of overall span height up from fixing point.
- To comply with the appropriate design wind load requirements and glazing standards
Some dimensions detailed above may be nominal.
Due to continual product development, G.James reserves the right to change, delete or add any information, section profiles, construction details and specifications relating to this product without notice
Due to continual product development, G.James reserves the right to change, delete or add any information, section profiles, construction details and specifications relating to this product without notice
Specify This
To correctly specify this product, copy and paste this text block into your project documentation.
All windows shall be G.James 851-500 Series compliant with AS2047, glazed in accordance with AS1288 and installed to the manufacturers recommendations and details. All surface finishing shall be in accordance with AS1231 (Anodising) and/or AS3715 (Powder Coating).
