Download Complete Residential Product Selector as a PDF file.

245 Series Sliding Door

  • Dimensions in blue detail the aluminium frame size. Use the height and width dimensions when ordering.
  • Dimensions in black detail stud opening size with reveal (includes a 10 mm clearance).
  • These sizes are intended as a guide only with other sizes available upon request.

XO Configuration

1560 1510 1860 1810 2160 2110 2460 2410 2760 2710
2130×1560 XO configuration. 2130×1860 XO configuration. 2130×2160 XO configuration. 2130×2460 XO configuration. 2130×2760 XO configuration.

XXO Configuration

2729 2679 3179 3129 3629 3579
2130×2729 XXO configuration. 2130×3129 XXO configuration. 2130×3629 XXO configuration.

OXO Configuration

2771 2721 3221 3171 3671 3621
2130×2771 OXO configuration. 2130×3171 OXO configuration. 2130×3621 OXO configuration.

OXXO Configuration

3042 2992 3642 3592 4242 4192 4842 4792
2130×3042 OXXO configuration. 2130×3642 OXXO configuration. 2130×4242 OXXO configuration. 2130×4842 OXXO configuration.

OXXXXO Configuration

4478 4428 5378 5328 6278 6228
2130×4478 OXXXXO configuration. 2130×5378 OXXXXO configuration. 2130×6278 OXXXXO configuration.

Table headings indicate configuration width in mm, and all door configurations listed have a height of 2130 mm. Measurements are for stud opening with reveal (including 10 mm clearance).

  •  When ordering, always state the height dimension first.
  • The availability of certain sizes and configurations is dependent on the design wind load requirement of the site. Check with your G.James Representative to confirm availability.
  • All configurations are viewed from the outside looking inside.
  • All sliding panels will be positioned to the inner most track / s with screens fitted to the outside track. Conditions apply to the screening and position of the sliding panels for XXO and OXXXXO configurations - check with your G.James Representative.
  • Low profile sill and double glazed doors are available on request.
  • Elements of the above can be mixed to achieve other configurations.
  • Black hardware is supplied as standard.
  • Drawings may not be to scale.
  • Available on request (additional charges apply):
    – Timber reveals: finger joint pine (FJP), primed FJP, clear pine, meranti and LOSP
    treated types are available. When ordering nominate reveal type and width required.
    – Security, acoustic and energy efficient upgrades.
    – Non-standard sizes.

245 Series Sliding Door (Corner Configuration)

  • Dimensions in blue detail the aluminium frame size. Use the height and width dimensions when ordering.
  • Dimensions in black detail stud opening size with reveal (includes a 10 mm clearance).
  • These sizes are intended as a guide only with other sizes available upon request.

Inside

The inside of the door has a 270 degree corner.

OXXO

Two sliding panels and two fixed.
  • 1484/1471 mm 1438/1421 mm
  • 1784/1771 mm 1734/1721 mm
  • 2084/2071 mm 2034/2021 mm
  • 2384/2371 mm 2334/2321 mm

OXXXXO

Four sliding panels and two fixed.
  • 2135/2123 mm 2085/2073 mm
  • 2585/2573 mm 2535/2523 mm
  • 3035/3023 mm 2985/2973 mm
  • 3485/3473 mm 3435/3423 mm

Outside

The inside of the door has a 90 degree corner.

OXXO

Two sliding panels and two fixed.
  • 1652/1639 mm 1602/1589 mm
  • 1952/1939 mm 1902/1889 mm
  • 2252/2239 mm 2202/2189 mm
  • 2552/2539 mm 2502/2489 mm

OXXXXO

Four sliding panels and two fixed.
  • 2437/2424 mm 2387/2374 mm
  • 2887/2874 mm 2837/2824 mm
  • 3337/3324 mm 3287/3274 mm
  • 3787/3774 mm 3737/3724 mm

All door confogurations listed have a height of 2130 mm. Measurements are for stud opening with reveal (including 10 mm clearance).

  • All dimensions stated are in millimetres.
  • When ordering, always state the height dimension first.
  • All aluminium frame sizes detailed above refer to the outer frame dimensions of the door exclusive of the fixing fin.
  • All configurations are viewed from the outside looking inside.
  • XO & OX doors can be reversed after installation.
  • All sliding panels are positioned on the inner most track(s) with any screens to the outer track(s). This situation may differ for XXO and OXXXXO configurations - check with your G.James Representative.
  • The frame size of all 2100mm high doors supplied to N5C3(W60) category sites will be at 2054mm high.
  • Sizes up to 2400mm and low profile sill available on request.
  • Black hardware is supplied as standard.
  • The availability of certain sizes and configurations is dependent on the design wind load requirement of the site - check with your G.James Representative.
  • Drawings may not be to scale.
  • Available on request (additional charges apply):
    – Timber reveals: finger joint pine (FJP), primed FJP, clear pine, meranti and LOSP
    treated types are available. When ordering nominate reveal type and width required.
    –Security, acoustic and energy efficient upgrades.
    –Non-standard sizes.

245 Series Possible Configurations

Configurations